User guide

Reconnex Corporation
166
Release 7.0.0.4
Managing Devices
The inSight Console controls all other Reconnex devices on your network. This includes iGuards
capturing data in motion as well as any other systems that may be finding data at rest or interacting
with mail servers.
After installing new appliances, they must be added to the inSight Console.
Add a Device
Before inSight can control other Reconnex devices on the network, a connection must be
established. This is done by adding the device from the inSight Console.
Note: Integration with Prevent and Discover machines is planned for a later release.
1. Go to System Administration.
2. Add New Device.
3. Add the IP address of the new device.
4. Enter the system's password.
5. Add.
Important: Adding an iGuard wipes the current configuration of that machine.
6. Verify that the device is in the list that is launched.