User guide

iGuard/inSight User Guide
Release 7.0.0.4
139
5. Update.
Setup Wizard Method
1. Go to System > System Administration.
2. On the list of appliances, find the inSight or iGuard you want to configure.
3. Click on the Configure Link.
4. Click on the Setup Wizard button (above the dialog box at the right-hand side).
5. Make host and network changes on the Step 2 page.
6. Click through the remaining pages with Next.
7. When you have finished making changes, click Submit.
Setup Wizard
The Setup Wizard includes the ability to change the administrator setup and the policies activated
on different iGuards from the inSight Console.
Note: If you are setting up a new iGuard and the setup remains the same as the last
installation, you can select Cancel to expedite the setup process.
To start the Setup Wizard:
1. Go to System > System Administration.
2. Select an iGuard.
3. Click on the Configure Link.
4. Click on the Setup Wizard button.
5. Make host and network changes on the Step 2 page.
6. Click through the remaining pages with Next.
7. On the Review page, Submit.