User guide

Reconnex Corporation
138
Release 7.0.0.4
Note: If you want to add more than one item, separate them with a comma (no space).
8. When you have finished filtering, Apply.
9. Review the log and repeat the action until you get the information you need.
Important: Don't forget to Clear All before creating another filter.
System Administration
Administering your system is now a point-and-click operation from the System Administration
dashboard.
To make changes, select the Configure or the Advanced link.
Host and Network Configuration
You can change the host and network configuration by editing the System Configuration
window, or by launching and editing the Setup Wizard.
Configuration Method
1. Go to System > System Administration.
2. On the list of appliances, find the inSight or iGuard you want to configure.
Note: If you are on an inSight Console, you will see all of the devices being monitored on this
page. If you are on a standalone iGuard, you will see only your own iGuard.
3. Click on the Configure link for the system.
4. Make host and network changes in the Network dialog box.