User guide

Reconnex Corporation
92
Release 7.0.0.4
Delete a Policy
There are two ways of deleting a policy.
Note: You can delete a policy only if you own it.
1. Go to the Policies tab.
2. Select the Trash icon on the line of the policy you want to delete.
or
1. Check the box of the policy you want to delete.
2. Pull down the Actions menu and select Delete.
Execute a Policy
The ability to execute a policy is determined by the permissions that are set for the group or groups
to which a user belongs.
If you do not have executive privilege for a policy, you cannot find incidents and violations in the
network data stream and results will not appear on your dashboard.
If you are not finding the violations you expected to see on the dashboard, view the permissions
assigned to your group to see what privileges you have.
Contact your administrator if the execute box for the policy you need access to is not set.
Publish a Policy
Publishing policies tells each iGuard or Discover appliance on your network what policies you want
that machine to use to find incidents and violations.
You can publish different policies to each appliance, or you can unpublish those you do not need.
For example, if you want the rules in the Human Resources policy to monitor your network, you
should publish it to all of the iGuards on your network.
1. Go to the Policies tab..
2. Click on the policy you want to publish.
3. In the Edit Policy window, check a box for either All iGuards or a specific iGuard from
the list of machines available.