User Manual

© 2004 Allen Products Company Incorporated, Signal Hill, CA 90755 USA [phone] 07/04
Figure 3 Figure 4
Figure 5
Step 7. Adjust the Pan Angle:
Hold both ends of the cross bar then slightly turn horizontally (clockwise or counter clockwise) until desired direction is
achieved (Figure 5).
Step 8. Adjust the Tilt Angle:
See U-bracket Instruction sheet.
A
llen Products Company Inc.
1635 E. Burnett Street
Signal Hill, CA 90806 USA
Tel: [phone] Fax: [phone]
Web Site: www.allenproducts.com