User manual

Personal Priority Display
Basic sign operation: Turning the sign on and off 9
Basic sign operation
Turning the sign on and off
When you plug in the sign’s power supply, the sign starts up
automatically, and unplugging the power supply turns the sign off.
However, instead of unplugging a sign, there are two others ways to
turn a sign off:
Holding down SHIFT and then pressing PROGRAM on a Remote Control turns
a sign off and on.
Using the and keys also turns a sign off and on
NOTE: Messages that you have programmed into the sign will not be
lost when you turn a sign off. Messages will be retained for
up to 10 days if the sign is not powered.
When you do this... You see this...
and at the same time
Press 5 times.
Press to turn the sign off.
To turn the sign back on, press .
BUTTON MENU
RESUME (A)
Turn Unit Off (A)
Turn Back On (B)