User manual

Personal Priority Display
Description and installation: Personal Priority Display technical specifications 7
Personal Priority Display technical specifications
EMI compliance
While this device is a verified Class A device, it has been shown to
meet the Class B limits.
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Changes or modifications made to the Personal Priority Display that
have not been expressly approved by Adaptive Micro Systems, LLC.
could void your authority to operate the Personal Priority Display.
Item Description
Weight:
Display: 1 lb 5 oz (595.35 grams)
Power supply: 1 lb 3 oz (538.65 grams)
Height: 3.5 in (8.89 cm)
Length: 13.7 in (34.80 cm)
Depth: 1.84 in (4.67 cm)
Input voltage: 9.0 VDC, 1.5 amp
Power supply: 120 VAC 60 Hz or 230 VAC 50 Hz
Environmental
requirements:
The Personal Priority Display is for indoor use only. The
display should be operated in an environment where the
temperature is between 0 - 50 ° C, and the humidity
(non-condensing) does not exceed 95%.