User manual

Personal Priority Display

12 Basic sign operation: Setting the sign’s serial address

Setting the sign’s serial address

The serial address is a number from 0 to 99 assigned to a sign. This

number permits you to send messages to an individual sign in a network

of signs. Ordinarily, messages are broadcast to all signs on a network, but

when you give a sign a unique address, messages can be directed to

specific signs.

See Networking Alpha Signs (pn 9700-0112) for more information.

You can set the serial address by using either the Remote Control or

the

and keys:

Using the and keys to set a serial address

When you do this... You see this...

and at the same time

Press until SET SERIAL (A) appears.

Press .

Press to change the first digit (or to

select the second digit).

Press to change the second digit.

Press for Next.

and at the same time

Press to resume normal sign operation.

BUTTON MENU

RESUME (A)

SET SERIAL (A)

A Next, B Change

SET SERIAL (A)

BUTTON MENU

RESUME (A)