User manual

How to create and use a custom automode sequence
3 — Creating and sending messages 107
How to create and use a custom automode sequence
The message mode called Automode is the default mode used if no
other mode is selected in a message. It displays the message with all the
other modes provided with AlphaNET™ 3.0 software. (For descriptions
of the modes, see “Appendix B — Modes available on signs” on
page 137.)
A custom automode sequence can be created for each sign site.
You can set what modes automode will use by doing the following:
Creating or editing an Automode sequence
1. In Site Manager, choose Edit>Automode File:
2. Accept the name of default.aut for the file, choose an existing file
if there is one, or type in a different name for a new file to use. Then
click Open.
3. Click Add. Then select the Interlock > OK to add the Interlock
mode to our custom automode sequence: