Installation guide

Theater Installation Guide (97127016B) 19
Addressing and Hanging Box Office and Directional Signs — Setting Box Office and Directional Sign Addresses
Setting Box Office and Directional Sign Addresses
Step 1: Open the sign
1. Remove power from the sign.
2. Remove the sign’s cover by loosening the clips that hold the cover in place:
3. Unscrew the vertical rails that hold the LED boards. Then lift up frame holding the LED boards and
use the sign’s prop rod to hold the frame open:
Contact with high voltage
may cause death or serious
injury.
Always disconnect power to
unit prior to servicing.
Hazardous voltage.
WARNING
SM1000A
Vertical rail
Prop rod