Specifications

Installation instructions
Series B Alpha Ethernet Adapter II Kit Installation Instructions 5 of 8
➩ To ping the sign using AlphaNet
1. Start the AlphaNET diagnostics software.
Select Start > All Programs > AlphaNET > Diagnostics.
The Diagnostics window opens.
2. Select TCP/IP and click Setup.
The TCP/IP Setup window opens.
3. In the TCP/IP Setup window, set the following:
4. Click Ping Address:
If this message appears... Then do this...
Reply from... The test was successful, go to the next test.
Request Timeout... The test failed. Contact your network administrator.
• IP Address—Set this to the sign’s IP address.
• Port—Set to 3001.