Instruction manual

7
Playing a Message
The Sequencer plays recorded messages in sequential order
(great for books, steps and tasks).
1. When finished recording messages, slide the PLAY/RECORD
switch to the PLAY-1 position. Press down on the Sequencer, and
your message will play back. Press down again, and your next
message will play.
2. To access the second level of messages, slide the PLAY/RECORD
switch to the PLAY-2 position.
3. Optionally access your Sequencer by inserting any external switch
with a standard ⁄” (3.5mm) plug into the jack labeled Ext Switch.
4. To reset the sequence back to the first message, slide the Play/
Record switch to the other level, then back. Play a message, and
it will resume with message one.
Please refer to the section, Sequencing Ideas at the end
of this manual for example uses of sequencial messaging.