Instruction manual

5
Battery Installation
1. Check to ensure that your Sequencer is turned ON by rotating
the Volume/Power knob to the full ON position.
2. Open the battery compartment cover by removing the single
Phillips-head screw.
3. Properly insert a 9-volt battery. If your battery is fresh, you will
hear a one-second power-up beep sound.
4. Replace the battery compartment cover and secure with the
screw. Take care not to overtighten.
For optimal performance, Adaptivation recommends the
use of alkaline batteries only.
When changing the battery, your Sequencer will retain all
recorded messages.
When you are not using the Sequencer, we recommend
turning off the device to prevent accidental activation
and to save on battery life.