Instruction manual

10
Trouble-Shooting
Does not play back.
- Make sure the volume knob is turned up.
- Battery may be too low.
- If an external speaker is used, make sure the cable is plugged
into the EXT SPK jack.
- If an external speaker is used, does it need its own power
supply?
- Make sure the Sequencer is in Play mode.
- If using an external switch, does it work?
Relay does not activate.
- Make sure the cable connector is working.
- Make sure the cable connector is plugged into the RLY OUT
jack.
- Make sure the adapted device you are trying to operate
works. Try plugging a switch directly into the adapted
device.
The Sequencer is not recording.
- Make sure the Sequencer is in the REC mode.
- Battery may be too low.
- If using an external switch, make sure it works.
- If using an external switch, make sure it is plugged into the
EXT SWITCH jack.
Poor sound quality.
- Speak clearly into the side marked MIC, holding the Se-
quencer about 12 inches away. Don’t speak too loudly.