Specifications

Plugging in Your Hub

Follow the picture below to connect your XHub unit to your computer

and to a power source.

Start by plugging in the power adapter. The green Power LED at the top

of the hub should light up when the power goes on.

Note: Although the Power LED remains lit when the hub is

plugged in, the hub enters power-saver mode if there has been no

activity on the USB bus for 3 ms.

Hub Connections

Plug USB cable into

Plug power

USB port on computer.

(to power source)

Power LED

Step 1:

Step 2:

Step 3:

XHub USB Uplink port.

XHub Power port.

adapter into