Specifications

9
Stacking Your Hubs
If you want to add more USB 2.0 ports to your system, Adaptec XHubs
can be daisy-chained (linked in series) and stacked together. (See Making
the Most of Your Daisy-Chain on page 11 for more information.)
Hubs can be piled on a flat surface (such as your desk) or they can be
joined together using the built-in connector slots and tabs.
To join your hubs using the connector slots and tabs:
1 Remove the face or frame plate, as shown in the picture below.
Removing the Face Plate/Frame Plate
Gently pull latch down to
Pull face/frame
plate down to remove.
release face/frame plate.
Step 1:
Step 3:
Step 2:
Pull bottom of
Tab
face/frame plate
out slightly.