Instruction manual

3
Plugging in Your Devices
Follow this picture to connect your USB 1.1 and 2.0 devices
to your XHub2. You can use either USB port on your hub.
Note: USB 1.1 devices won’t operate at USB 2.0
speeds, even if they’re connected to a USB 2.0 hub or
adapter. See About USB 2.0 Performance on page 1 for
more information.
Unplugging Your Devices
Device manufacturers support hot-plugging in different
ways. Some devices (like CD-ROM drives) must be
stopped before they are unplugged. Refer to your devices’
documentation for disconnection recommendations.