User`s guide

47
Changing the Setup of Your WLAN
Filtering MAC Addresses
You can control which wireless stations can connect to your
Wireless Router by enabling MAC address filtering.
To enable and set up MAC address filtering:
1 Open the Utility and log in. (See page 22.)
2 Click Wireless (802.11) under Basic Setup on the menu list.
3 Click the Connection tab.
4 Select a MAC Filtering setting.
■ Select Allow all except listed below to exclude specific
stations from accessing your network.
■ Select Deny all except listed below to exclude all
unspecified stations from accessing your network.
5 Add a MAC address to the list by typing the address in the
bottom text box and clicking Add to List. Repeat until all
required MAC addresses are added.
6 Click Save & Restart.
To remove a MAC address from the list:
1 Click on the desired MAC address, then click Remove selected
from list.
2 Click Save & Restart.