User`s guide

35
Managing Your Wireless Router
Setting an Automatic Logout Time
By default, the Utility is set to automatically log out inactive
Administrators. If a user is logged in to the Utility but is not
making changes or regularly refreshing the pages to monitor your
system, the Utility automatically logs the user out after 300 seconds
(5 minutes).
You can change the Auto Logout time setting as required.
Note: Because only one user at a time can be logged in to the
Utility, maintaining a low Auto Logout time helps prevent an
idle network station from blocking access to the Utility from
other stations.
To change the Auto Logout time:
1 Open the Utility and log in. (See page 22.)
2 Click Administration on the menu list.
3 Scroll down to the Administrator section, then type the new
desired time (in seconds) in the Auto Logout box.
4 Click OK.