User`s guide

Managing Your Wireless Router

Changing System Settings

You can use the System Setting options to save current system

settings, or restore your system to its default or saved settings.

To make system setting changes:

1 Open the Utility and log in. (See page 22.)

2 Click Administration on the menu list.

3 Click one of the System Setting buttons:

■ Click Reset to Default to change all system settings back to

their factory default values. The Wireless Router restarts

automatically after the reset is complete.

Note: You can also reset your Wireless Router to its

factory default settings by pressing and holding the

Router’s INIT button for 5 seconds.

■ Click Backup Setting to save all current settings in a file. If

you make further configuration changes, this file can be

used to restore the system to these backed-up settings.

■ Click Restore Setting to apply a previously saved

configuration. After you click Restore Setting, click Browse,

find the file, then click Go.