User`s guide

30
Configuring Your Wireless Router
5 Click the Security tab.
6 Set the WEP Configuration settings to match your WLAN. If
you are setting up a new WLAN, Adaptec recommends that
you enable Wired Equivalent Privacy (WEP) on your WLAN as
a security measure. See Changing the WEP Configuration Settings
on page 41 for detailed information.
Each station on your WLAN must have identical WEP
Configuration settings.
7 Click Save & Restart.
You have completed the Installation Task List and your Wireless
Router is ready for use. See the sections starting with Managing
Your Wireless Router on page 31 to learn more about using your
Wireless Router.
If you select
WEP Enabled, you
must adjust these
settings to exactly
match your other
wireless stations.