User`s guide

Configuring Your Wireless Router

Adjusting the Wireless Settings

Follow the instructions provided for your specific WLAN:

■ If you are setting up a new WLAN using only Adaptec Ultra

Wireless products, you don’t need to adjust any Wireless

settings. (Adaptec Ultra Wireless products are preset to work

together on a WLAN.)

You have completed the Installation Task List and your Wireless

Router is ready for use. See the sections starting on page 31 to

learn more about using your Wireless Router.

■ If you are adding your Wireless Router to an existing WLAN, or

are setting up a new WLAN using non-Adaptec brand wireless

adapters, you must adjust the Wireless settings on your

Wireless Router to work with your wireless devices. Continue

with the instructions provided in this section.

Note:

See

Before You Begin...

on page 9

for a list of information

you’ll need to successfully adjust the Wireless settings.

To adjust the Wireless settings:

1 Open the Utility and log in. (See page 22.)

2 Click Wireless (802.11b) under Basic Setup on the menu list.

3 Click the Basic tab.

4 Type in the Wireless Network ID (SSID) used on your WLAN

stations. If you are setting up a new WLAN, create an SSID to be

used on all your wireless stations. Each station on your WLAN

must have the same Wireless Network ID.