User`s guide

Installing Your Wireless Router

4 Record your Internet settings from the computer connected to

your Broadband modem before continuing with Step 5. See

Before You Begin... on page 9 for a list of information to record.

5 Disconnect your Broadband modem from the computer.

6 Plug your broadband modem into the WAN port on your

Wireless Router, as shown below, using the Ethernet cable

provided.

7 Connect a network cable to one of the four LAN ports on your

Wireless Router. (See the Figure in Step 6.) Connect the other

end of the cable to an Ethernet port on your computer.

8 Add more LAN stations to your Wireless Router, if desired,

using network cables. You can connect up to four LAN stations,

or you can connect a network hub or switch to extend your

LAN.

To continue with the next Installation Task, see Setting Up Your

Network Stations on page 21. (To complete your WLAN set-up,

follow the instructions provided with your wireless network

adapters.)

Step 7:

Connect the LAN.

Step 6:

Connect the WAN.