User`s guide

5 The Add Replica dialog opens.
6 Enter the required details about the destination site and click Add.
Creating Replicas
Adaptec Storage Manager includes a replica wizard to help you create a replica at
the specified replica site. A replica can include one volume or multiple volumes,
including mirrored volumes.
To create a replica,
1 In the Enterprise View, select the iSCSI Storage Host.
2 In the Volumes View, select the volume you want to replicate.
3 Click the Create Replica button. Or, in the Actions menu, select Create Replica.
The replication wizard opens.
4 Select the logical device(s) you want to include in the replica set.
Note If the logical device you select has dependent volumes listed, Adaptec
strongly recommends that you copy the volume and its dependencies, to avoid
losing related data.
5 Type a name or description for the replica, then click Next.
6 Select the management service for creating the replica.
• Set the Compression: Enabled or Disabled
• Set the CRC: Enabled or Disabled
7 Click Next.
8 Select the replica pool for each volume in the replica set Then click Apply to
create the replica immediately or, click Schedule to schedule the replica update
for a later time.
When the replica has been created, it appears in the Enterprise View. Select any
replica in the Enterprise View to open the Replica View.
Updating Replica Set
1 In the Replica View, select the Replica set section name.
2 Right-click the replica set and select Update Replica Set.
The Update replica screen opens.
3 Select Update Now to update the replica set immediately or Scheduled Update
to schedule a replica update.