User`s guide

Adding a System to the VDS/VSS Host List
To add a system to the VDS/VSS host list:
1 In the Enterprise View, right-click the Management Service, select Management
service actions
, then click Manage VDS/VSS access.
The Microsoft VDS/VSS Access window opens.
2 Click Add.
The Enable Microsoft VDS/VSS Access from this
Host window opens.
3 Enter the host name of the system, then click Add.
Note To find the host name for a system, open a
command prompt window, type
hostname, then
press
Enter. Use the displayed host name in the
Enable Microsoft VDS/VSS Access from this Host window. You can’t use the
system’s IP address.
The host name appears in the host list.
4 Repeat Steps 2 and 3 to add more systems to the host list.
5 Click OK to close the Microsoft VDS/VSS Access window.
The systems you added to the host list can now complete jobs through the
Management Service.
Note If your system has problems connecting to the VDS Provider, see page 147 for
troubleshooting tips.
Removing a System from the VDS/VSS Host List
To remove a system from the VDS/VSS host list:
1 Open the Microsoft VDS/VSS Access window (see Step 1 on page 49).
2 Select the system you want to remove, then click Remove.
The system is removed from the host list.
3 Click OK to close the Microsoft VDS/VSS Access window.