User`s guide

3 Enter the host name or TCP/IP address of your iSCSI Storage Appliance, then
click
Add. The TCP/IP address appears on the front panel LCD display of your
Snap Server 700i Series.
Note An iSCSI Storage Appliance can be associated with (or added to) only one
Management Service at a time.
If prompted, click
OK, enter the Administrator password for the iSCSI Storage
Appliance, then click
Add. (You will only be prompted for a password if this
iSCSI Storage Appliance was added to another Management Service previously.)
The default password is
admin.
The iSCSI Storage Appliance is added to Adaptec Storage Manager.
Step 2: Configuring the iSCSI Storage Appliance
The wizard comprises three configuration steps, listed in the left panel:
• Configure iSCSI Storage Appliance
• Create RAID pools
• Provision Storage
This section explains the steps in the order in which they’re presented in the wizard.
To configure your iSCSI Storage Appliance:
1 Select the iSCSI Storage Appliance (shown as ‘OnTarget’ in the previous figure),
then click
Next.