User`s guide

Available Properties and Values
Property Values
INSTALLDIR
(Not required)
Specifies the installation path. If you are specifying the installation path, it
must be set for a command line install, and must be enclosed in escaped
quotation marks.
For example:
INSTALLDIR=\"C:\Program Files\Adaptec\Adaptec Storage Manager\"
Note: If you do not explicitly set the installation path, the default path is
"C:\Program Files\Adaptec\Adaptec Storage Manager"
USERNAME
(Required)*
Specifies the log-in user name for the Management Service.
*This Property is required only if the Management Service feature is
installed.
PASSWORD
(Required*)
Specifies the log-in password for the Management Service.
*This Property is required only if the Management Service feature is
installed.
MGMTLOC
(Required*)
Specifies the location of the local or remote Management Service to allow
access for VDS/VSS. This value should be the local computer name, not
“localhost”.
*This Property is required only if VDSExternal or VSSExternal features are
installed.
MGMTUSER
(Required*)
Specifies the Management Service log-in user name to set up VDS/VSS
access. If you are installing the Management Service onto the local
computer, this value is the same as the USERNAME property.
*This Property is required only if VDSExternal or VSSExternal features are
installed.