User`s guide

SANbloc S50 Hardware Checklist
The following checklist shows the required and optional hardware to install an S50 ,
and indicates whether a component comes with the server or must be supplied by
the customer.
Component Description
Connection
and Power
;
SAS Cable (1 per enclosure)
Required to connect the expansion array to the host Snap Server 700i
Series.
;
Power Cables (2 per enclosure)
Required to plug into the mains.

APC-Brand UPS Device(s) (optional)
The S50 should be connected to the same UPS as the Snap Server to
which it is attached.
Rack
;
Rack Mount Brackets
Two (2) rack mount shelves and screws for attaching the server to a
rack.

EIA-Compliant Rack
S50 expansion arrays are designed for use with EIA-compliant 4-post
racks.