User`s guide

Note At any time, you can open the Properties window of a component by double-
clicking the component in the right panel of Adaptec Storage Manager.
Identifying Which Fan has Failed
If the fan icon shows a failed
fan, you can determine which
fan failed by selecting the
affected server in the
Enterprise View, then
double-clicking the
Enclosure Management
Device icon to open the
Properties window for the
server. Click the
Status tab,
then scroll through the list of
enclosure components. A
yellow or red exclamation point will appear next to the problem component.
Error is in your iSCSI Storage storage...
...on this disk drive.
Double-click the
disk drive to
continue tracing the
fault to its source...
...that the disk drive has failed.
...on this iSCSI Storage Appliance...