User`s guide

Disk Drive LEDs
Disk drive LEDs on the Snap Server 700i Series are located beneath the status lights
on the bezel. For all disk drive LEDs, the left light indicates drive status; the right
light indicates drive activity. They operate as follows:
Note You can blink a disk drive from Adaptec Storage Manager by right-clicking
the drive and selecting
Blink disk drive. See “Blinking Appliances, Enclosures, and
Disk Drives” on page 109 for instructions.
Power Supply Module Indicator Lights
The LED on a 700i Series power module is identified in the following illustration.
Status LED (left) Activity LED (right)
Solid green Off Disk drive installed properly but is not active
Solid green Blinking green Disk drive installed properly and is active
Solid amber Off Disk drive installed, but not working
correctly
Off Off No disk drive installed
Power Description
Solid green The module is operating properly.
Blinking green The module has failed or is not connected.
Solid amber
Off
The module has failed, is not connected, or the server has
been turned off.
Status LED