User`s guide

What Do the Status Icons Mean?
Adaptec Storage Manager indicates event status with icons. This table lists the three
categories, or types, of events based on severity.
Warning- and Error-level icons appear next to all components (such as iSCSI
Storage Hosts and pools) affected by a failure or error, creating a trail that helps you
identify the source of a problem. See “Identifying Failed or Failing Components” on
page 148 for more information.
Viewing Enclosure Status
If your IP SAN includes an enclosure with an enclosure management device, such
as a SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) processor, Adaptec Storage
Manager also displays temperature, fan, and power module status in the Physical
Device view, as shown in the next figure.
Icon Status Examples
Information • A connection to the Management Service was successfully
established.
• A pool was created.
• A volume was created.
• A logical device was deleted.
Warning • A volume is in a degraded state.
• A disk drive is being rebuilt.
• A hot spare in a pool has failed.
• An enclosure fan or power supply has failed.
Error • A pool has failed.
• A disk drive within a pool has failed.
• An iSCSI Storage Appliance is not responding.
Fan Status
Temperature Status
Power Module Status
Enclosure Status Icons
Enclosure Management
Device Icon
Battery Status