User`s guide

3 In the tool bar, click Create, then select
Create logical device.
Alternately, click the
Create Logical Device
button in the Logical Devices View, as
shown above right.
The wizard opens.
4 Continue with Step 3 on page 42 of “Provisioning Storage Manually”.
Modifying a Logical Device
You can change the size, name, and authentication method for any logical device.
To modify a logical device:
1 In the Enterprise View, select the iSCSI Storage Appliance you want.
2 In the Logical Devices View, right-click the words ‘Logical devices’, then select
Modify logical devices.
The wizard opens to the Define Logical Devices screen.
3 Click the tab of the pool you want.
The logical devices for that pool are displayed.
4 Adjust the logical device settings, as required. (See “Provisioning Storage
Manually” on page 42 for more information.)
5 Click Next, click Next again, then review the configuration summary.
Notes To create or edit the Auto-discovery Control List for a logical device, see
“Limiting Discovery of iSCSI Targets with Discovery Control Lists” on page 83.
6 Click Apply, then click Yes.
The new settings are saved in the iSCSI Storage Appliance.
Deleting a Logical Device
Caution Before you begin, ensure that you have backed up any data that you want
to save. When the logical device is deleted, any data or programs stored on that
logical device are also deleted.
Right-click here