User`s guide

3 In the Actions menu, select Configure read cache, then select either Enabled or
Disabled.
4 Click Yes to change the cache setting.
The setting is changed.
Deleting an Individual Pool
You can delete an individual pool (and all the logical devices that are defined in that
pool) if your requirements change. To delete all pools at once, see page 101.
Before you begin, ensure that you have backed up any data that you want to save.
When the pool is deleted, any data or programs stored on that pool are also deleted.
To delete a pool:
1 In the Enterprise View, select the iSCSI Storage Appliance you want.
2 In the Logical Devices View, select the pool you want to delete.
3 In the Actions menu, select Delete pool.
4 Click Yes to delete the pool.
The pool is deleted.
Note Depending on your OS, the drive-letter assignments of any remaining
drives may change after a pool is deleted and the system is rebooted.
Deleting All Pools
Caution Deleting all pools destroys all data in the iSCSI Storage Appliance. Before
you begin, ensure that you have backed up any data that you want to save.
To delete all pools in an iSCSI Storage Appliance:
1 In the Enterprise View, select the iSCSI Storage Appliance you want.
2 In the Logical Devices View, right-click the word ‘Pools’, then select Delete all
pools.
3
Click Yes to delete all the pools.
The pools are deleted.
Right-click here