User`s guide

8 In the Enterprise View of Adaptec Storage Manager, select the new iSCSI Storage
Appliance.
9 In the Logical Devices View, select the pool you just exported.
Note Only one foreign pool at a time can appear in Adaptec Storage Manager.
10 In the Actions menu, select Import pool.
11 Click Yes to import the pool.
The pool is imported to the new iSCSI Storage Appliance. This process can take
up to three minutes.
Resetting Authentication on Imported Logical Devices
If authentication was set on any logical devices before you exported the pool, it
must be reset once the pool is imported.
To reset authentication:
1 In the Enterprise View, select the iSCSI Storage Appliance you want.
2 In the Logical Devices View, right-click the words ‘Logical devices’, then select
Modify logical devices.
The wizard opens to the Define Logical Devices screen.
3 At the top of the wizard, click the tab of the pool you want.
The logical devices for that pool are displayed.
4 (Optional) Click inside the Authentication box next to a logical device and select
the authentication method.
Note If possible, re-use the authentication settings that were set before you
moved the pool. If the pool contains automatically provisioned volumes, use new
Right-click here