Installation guide

57
APPENDIX
A
Configuration Rules
This appendix lists the configuration rules for the Sun StorageTek SAS RAID Internal
HBA.
Note – Use only Sun-approved devices and cabling with the HBA.
The appendix contains the following sections:
■ “Target Devices” on page 57
■ “Cabling” on page 58
Target Devices
The following rules apply for supported target devices:
■ Internal Enclosures:
■ SAS/SATA backplane
■ SASA/SATA backplane with SES-2 enclosure management support
Note – Enclosure cascading is not supported.
■ SAS/SATA HDDs:
■ Eight direct-attached per HBA (128 HDDs maximum via backplane SAS
expander)