User`s guide

10-4

Fast Ethernet Network Interface Cards

Configuring Ports

Select the Configure Ports option from the Main Menu.

The program automatically adds or removes ports when new

hardware is added or removed. After removing a NIC, you

must reinstall and configure the driver for all ports. This is

because the port index number relationship to the physical

port location will have changed.

Note:

The driver numbering schemes for the ports

(EMPCI1, EMPCI2, etc.) are not associated with the

physical PCI slot numbers on the motherboard. It is

recommended that you check physical connections

against the port information displayed on the screen.

See Appendix C, Identifying Ports for more

information.

To set the connection type, select each port individually and

press Enter.

Main Menu

Configure Ports

Set Failover Pairs

Configure Protocols

View Configuration

Install Software

Uninstall Software

1 Empci1

Enabled

Autodetect (default)

Enabled

2 Empci2

No. Port Name Connection Type

Status