User`s guide

9-1
9
▼▼▼▼
Installing Duralink Drivers
for Windows NT
This chapter describes how to install Duralink Failover for
Windows NT 4.0.
Installation Overview
The following procedures are covered in this chapter:
■
Removing Existing Adaptec Ethernet NICs
on page 9-2
■
Adding NIC Drivers
on page 9-3
■
Configuring Failover Pairs
on page 9-6
Installation, configuration, and optional parameters for the software
are updated regularly. The
readme
subdirectory contains
supplemental installation instructions, as well as other up-to-date
information pertaining to the software, and should be read prior to
installing Duralink Failover.