User`s guide

7-2
Fast Ethernet Network Interface Cards
Configuring Ports
1
To change the NIC configuration settings highlight the NIC to
configure and click Edit.
Note:
There are three ways to gain information for
each parameter:
- select Range to see valid choices
- press F1 to see parameters and default settings
- select Help for additional details
2
Select the Tranciever type. For an explanation of possible
options see Connection Types on page A-2 or press F1.
3
Specify Full or Half Duplex
4
Specify the Index number.
Note:
Each port must be assigned a unique index
number.
5
Make any other necessary changes and click OK.
6
Repeat Steps 1 - 5 for each port.
Configuring Protocols
1
Under Protocols, highlight the desired network protocol(s) and
click Add.
Note:
The NetBios protocol is required for LAN Server
and OS/2 Peer connections.
If you selected IBM NetWare Requester Support from the
Protocols box, you need to make the following configuration
changes:
– In the Current Configuration box, highlight IBM NetWare
Requester and select Edit.
– Change the Token-Ring Support Option to NO.