User`s guide

6-1
6
▼▼▼▼
UNIX
This chapter describes the installation of Unix drivers. The drivers
are located on Diskette 1.
SCO OpenServer 5.0
This section describes how to install LAN drivers for SCO
OpenServer 5.0.
Adding NIC Drivers
1
Power
OFF
your system and install the adapter in a PCI bus
mastering slot.
2
Boot the system with SCO OpenServer 5.0 and login as the root
user.
3
Double-click the
Software Manager Icon
on the desktop.
4
From the menu, select
Software
and then
Install New
.
5
Press
Continue
.
6
Insert Driver Diskette 1 in drive A and click
Continue
.
7
Select
Full
installation.
8
After scrolling through the
readme
, click
OK
to complete the
installation.
9
Exit the Software Manager by clicking
Host
and then
Exit
.