User`s guide

5-5
Windows
Configuring Ports
To configure NICs
1
In the Network dialog box, highlight the NIC in the list of
installed drivers and select Properties.
2
From the Properties dialog box, select Advanced, then choose
the appropriate connection type. For an explanation of options
see Connection Types on page A-2.
Configuring Protocols
1
From the Properties dialog box, highlight Protocols and click
Add.
2
Highlight Protocol and click Add again.
3
Select the type of protocol you wish to bind and click OK.
4
After you have made all changes, click OK in the Network
dialog box.
5
Windows 95 will prompt you to restart your system. Click Yes.
❒