User`s guide

5-1
5
▼▼▼▼
Windows
This chapter describes how to install LAN drivers for Window NT
and Windows 95. For additional information on installing LAN
drivers for Windows’ environments refer to the
readme.txt
file.
If you are using an Alpha Server please refer to the NT for Alpha
readme.txt
file.
Windows NT 4.0
This section describes how to install LAN drivers for Windows NT.
To install Duralink Failover drivers refer to Chapter 9,
Installing
Duralink Drivers for Windows NT
.
The Windows NT 4.0 driver is in the
\
winnt\i386
directory.
Note:
These instructions are for Windows NT 4.0 only. To
install drivers for Windows 3.51, see the
readme.txt
file.
Removing Previously Configured Drivers
If there are no previously installed Adaptec NICs go to
Adding NIC
Drivers
on page 5-2. Otherwise follow these steps:
1
Boot your system with Windows NT 4.0
2
Double-click the
My Computer
icon.
3
Double-click the
Control Panel
icon.
4
Double-click the
Network
icon.
5
Click the
Adapters
tab in the Network Setup dialog box.