User`s guide

4-3
NetWare
Configuring the Ports
1
Select the new empci from the updated list of NICs.
2
Type in a name for the newly added NIC.
Note:
When choosing a name for the NIC, you should
include a reference to the index number assigned to
that NIC (See Step 3 below). This will help you identify
the NIC when configuring it. See Appendix C,
Identifying Ports for tips on identifying NICs.
3
Specify the index number in the next field (1 is the default for
the first board; set the next board at 2, and so forth).
Note:
Each port must be assigned a unique index
number.
4
Specify the connection type. Autodetect Default is
recommended. For an explanation of options see Connection
Types on page A-2.
5
Press Esc and save the configuration.
6
For each additional port, press Ins at the Boards screen and
repeat Steps 1 - 5.