User`s guide

4-1

▼▼▼▼

NetWare

This chapter describes how to install LAN drivers for NetWare.

The Novell NetWare driver,

\nwserver\empci.lan

is used with

NetWare 4.1x servers, NetWare 3.12 and NetWare 4 SFT III.

Note:

An Adaptec LAN adapter cannot be used as the MSL

NIC in an SFT-III environment.

NetWare 4.1x

This section describes how to install the LAN drivers for

NetWare 4.1x. To install the Duralink Failover drivers refer to

Chapter 10,

Installing Duralink Drivers for NetWare

NetWare 4.10 requires two patches to enable the ODI 3.3 support.

These can be found at

http://support.novell.com.

Download the

server patch

410pt7.exe

and the ODI 3.3 NLMs from the LAN driver

patch

landr9.exe

. ODI 3.3 patches are not required for NetWare 4.11.

INETCFG.NLM

is the recommended utility to properly install and

configure the NetWare driver.