User`s guide

C-2
Fast Ethernet Network Interface Cards
Installing 2 Network Cards
This scenario illustrates two possible setups for two ANA-6944
quad port network cards.
General Rules:
■
The system scans network cards one at a time.
■
The system always scans a network card from top to bottom.
Therefore, the top port is always first.
■
The system always scans the ports on a network card in
consecutive order before proceeding to the next network card.
The system scans network cards either from left to right, or from
right to left. If network cards are scanned from left to right, then the
ports will be assigned as the following:
Network cardA
scanned
first
scanned first on the
second card
scanned
last on the
second card
scanned
last
Network cardB
1
2
3
4
5
6
7
8
Network cardA
Network cardB