User`s guide

ix
Contents
SCO UnixWare 6-3
Removing Previously Configured Drivers 6-3
Adding NIC Drivers 6-3
Configuring Ports 6-4
Configuring Protocols 6-4
Reconfiguring Ports and Protocols 6-5
7 IBM OS/2
IBM OS/2 Warp Versions 7-1
Adding NIC Drivers 7-1
Configuring Ports 7-2
Configuring Protocols 7-2
PART 3: Installing Duralink Failover Drivers
8 Network Configuration Examples
Single Hub or Switch on an Ethernet Segment 8-2
Dual Hubs 8-2
Dual Hubs with an Ethernet Switch 8-3
Dual Hubs with Routers 8-3
Dual Hubs with a Four-Port Quartet NIC 8-4
9 Installing Duralink Drivers for Windows NT
Installation Overview 9-1
Removing Existing Adaptec Ethernet NICs 9-2
Adding NIC Drivers 9-3
Configuring Ports 9-5
Configuring Failover Pairs 9-6
Configuring Protocols 9-8
Monitoring Failover Pairs 9-8
Changing NIC Configuration 9-9