User`s guide

B-12
Fast Ethernet Network Interface Cards
❒
The Adaptec board is
not in the bus mastering
slot.
The Adaptec NIC is installed in a slave slot, or a bus
mastering slot for which bus mastering has not been
enabled. Move the adapter to another slot, or enable
bus mastering in the slot via your system’s BIOS
setup.
Your system’s BIOS
does not directly
support PCI bridges.
EMDIAG has
configured the system
for you. Please note the
resources it has
assigned. You may need
these values when
configuring the network
driver.
For Quartet adapters only. This message indicates that
the system BIOS is not capable of configuring a
multiport adapter. Thus, EMDIAG will configure the
adapter for diagnostics purposes, and the NetWare
driver will configure the adapter for NetWare
environments. For Windows NT, a BIOS upgrade for
the system will need to be obtained that will be able to
configure a multiport adapter.
Error Message Problem