User`s guide

B-5
Troubleshooting
Press Tab to select the Start button and then press Enter to begin the
local diagnostics tests. As each test finishes, the completion status is
displayed.
If any of theses tests fail, then a problem exists, possibly with the
network cable or the connection. To check the cable connection
1
Exit from EMDIAG .
2
Remove the cable from the NIC.
3
Reattach the cable.
4
Reboot.
5
Run EMDIAG .
Running Remote Diagnostics
Before running Remote Diagnostics, you must first set up an echo
server on another Adaptec NIC.
After selecting Remote Diagnostics from the Test Options menu, the
screen displays a list of tests it will run. The tests are: Remote
Loopback, Transmitter Section Statistics, and Receiver Section
Statistics.