User`s guide

A-2
Configuring the RAID Controller (FS4500 only)
Communication Parameters
■ 38,400 baud
■ 8 data bits
■ No parity
■ One stop bit
■ No flow control
Navigating the Terminal Emulation Software
■ Arrow keys—Move to options.
■ <Enter>—Move to a sub-menu or execute a function.
■ <Esc>—Move back to a higher level menu.
■ <Ctrl+L>—Refresh the screen.
■ Ctrl+W—Switch to secondary controller. (Cable must be in the
primary controller RS-232 port.)
Shortcut keys shown in bold onscreen can also be used for
navigation. For example, L is the shortcut key to open the view and
edit Logical drives menu.
Initial Screen
Use <Ctrl-L> to refresh, if necessary. Select the appropriate
terminal emulation mode or display the data transfer rates.