User`s guide

4-1
4
Removing and Replacing
Enclosure Components
In this Chapter....
The Storage Enclosure features described in Chapter 3 help you
identify which enclosure components require immediate
replacement. This chapter provides detailed instructions for
removing and replacing failed or damaged components of your
Adaptec Storage Enclosure.
Caution: Before touching any of the Storage Enclosure
components, ground yourself and take antistatic precautions.
Adaptec recommends that you use an antistatic wrist strap
and a grounding wire as a minimum precaution.
Failure to take adequate electro-static discharge (ESD)
precautions may lead to damage to your disk drives and
enclosure electronics.
Hot-swapping Drive Carriers 4-2
Hot-swapping an APC Module 4-4
Replacing an I/O Module 4-7
Hot-swapping the ES Module 4-10
!