User`s guide

TO
Indicates that the modications will follow
Options:
• Stripesize—indicates the stripe size in KB. Options are 16, 32, 64, 128, 256, 512, and 1024. the default
is 256KB.
• init_priority—is the priority level of the modication. Options are low, med, and high.
• Legs— is the number of subarrays for a RAID level-50 or RAID level 60 array. Possible values are 2-16
legs and 3-16 drives/leg (to 48 drives maximum).
Size is one of the following values:
• MAX indicates that you want to use all available space on the disk.
• Desired size in MB.
RAID# is the RAID level for the logical drive 0, 1, 5, 5EE, or 10.
Note: The CHANNEL# and DRIVE# parameters is the list of devices that will contain
the target modication object. Channel and device_ID are repeatable parameters.
Channel# is the channel number for the device.
Drive# is the device_ID (device number) for the device.
Noprompt is an optional parameter that overrides the user prompt.
Example
ARCCONF MODIFY 1 FROM 2 TO 2048 0 0 123 0 124 0 117
arcconf playcong
Description
Congures a controller using a XML server template le produced by the SAVECONFIG command (see
arcconf playcong on page 28). Use this command to deploy the same controller conguration on
multiple servers in your storage space.
Note:
1. The XML server template le (default, savecong.xml) is editable. For example,
you may need to change the disk drive capacity, logical drive size, or RAID level.
2. Drives from the same vendor with slightly different capacities (147GB vs 150GB,
for instance) are considered interchangeable. If the interchange results in a change
in logical drive capacity, the drive is scaled, as needed. For example, if the new
drives have 4% more capacity due to vendor or model changes, then all logical
drives are increased in size by 4%.
3. Be sure to check the log le to verify that the controller was congured successfully.
The exit codes, shown below, indicate the success or failure of the operation and
if the system needs to be rebooted.
MeaningValueCode
Conguration succeeded, no reboot is
required.
0SUCCESS
An error occurred and the conguration
could not be completed.
1FAILURE_GENERAL
Conguration succeeded, but a reboot is
required.
2SUCCESS_REBOOT
Syntax
ARCCONF PLAYCONFIG <Input XML File> [LogFile] [FORCE ALL|LOGICALSIZE]
28Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00276-01-A Rev. A, Issue:
Adaptec RAID Controller Command Line Utility User's Guide